DRL Circuit Test
WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition ON and the headlamps OFF.
- With a test lamp connected to ground, probe each of the test points on the DRL 2 fuse while commanding the DRL ON and OFF with a scan tool. The test lamp should turn ON and OFF between commanded states at one or both of the fuse test points.
- If the test lamp is always ON, test the supply voltage circuit between the DRL 1 fuse and the DRL 2 fuse for a short to voltage. If the circuit tests normal, replace the underhood fuse block.
- If the test lamp is always OFF, test the supply voltage circuit between the DRL 1 fuse and the DRL 2 fuse for a short to ground or an open/high resistance. If the circuit tests normal, replace the underhood fuse block.