Removal Procedure
WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (LE5, LE9, LY7) .
- Loosen the positive battery cable nut (1) and remove the positive battery cable (2) from the battery.
- Loosen the positive battery cable bolt at the junction block and remove the cable from the junction block.
- Remove the positive battery cable clip from the battery tray.
- Remove the tape holding the negative battery cable to the positive battery cable.
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
- Remove the positive battery cable nut (1) from the starter solenoid.
- Remove the positive battery cable (2) from the starter solenoid.
- Lower the vehicle.
- Remove the positive battery cable.