LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 1094 (Fixed And MOVEABLE Windows) >> Repair Instructions >> Rear Window Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear window into the opening with an assistant. Refer to Adhesive Installation of Stationary Windows (Rear Window) , Adhesive Installation of Stationary Windows (Windshield) .
  2. Install the sealing strip located on the bottom of the rear window.
  3. Connect the rear window defogger electrical connectors to the bus bars.
  4. Connect the connector from the radio antenna module.
  5. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.