LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Impala SS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 5.3L - Introduction (2 Of 2) >> Repair Instructions >> Crankshaft Position Sensor Replacement >> Removal Procedure

Removal Procedure

CAUTION: Refer to Vehicle Lifting Caution in Cautions and Notices.
    Fig 1: Crankshaft Position (CKP) Sensor Electrical Connector
    GM1554552Courtesy of GENERAL MOTORS CORP.
  1. Remove the right exhaust manifold. Refer to Exhaust Manifold Replacement - Right Side (RPO LS4) .
  2. Disconnect the crankshaft position (CKP) sensor electrical connector (1).
    3. Fig 2: View Of CKP Sensor & Bolt
    GM55322Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Clean the area around the CKP before removal in order to avoid debris from entering the engine.
  3. Remove the CKP sensor bolt.
  4. Remove the CKP sensor.
scientia non olet · About LEMON Manuals