Configurable Steering Wheel Controls

The four buttons on the left side of the steering wheel can be programmed for different functions. To program the buttons, perform the following steps:

w/ U2R or U2S

1. Press the TUNE/SEL knob.
2. Turn the TUNE/SEL knob until SETUP is displayed; press the knob to select.
3. Turn the TUNE/SEL knob until CONFIGURE SWC KEYS is displayed; press the knob to select.
4. Turn the TUNE/SEL knob to select the button to be programmed; press the knob to select. The current assigned feature is displayed.
5. Turn the TUNE/SEL knob to select the feature that you would like to assign to the button; press the knob to select.

w/ UAV, U2Y, or U2X

1. Press the MAIN button.
2. Press the Setup button.
3. Press the Prog SWC soft key.