Remote Control Door Lock Receiver Replacement

If the remote control door lock receiver is replaced, the following procedures must be performed:

1. RCDLR Programming - Refer to Service Programming System (SPS) 
2. Keyless Entry Transmitter Programming - Refer to Transmitter Programming
3. Tire Type Setup:
   1. Install a scan tool
   2. Select Remote Control Door Lock Receiver under Module Setup in the Vehicle Control System menu.
   3. Select Tire Type/Pressure Selection.
   4. Follow the on-sceen instructions.
4. Tire Pressure Monitoring Sensor Learn - Refer to Tire Pressure Sensor Learn