Inside Rearview Mirror Replacement

WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Replacing Inside Rearview Mirror

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Outside Rearview Mirror NOTE: Refer to Fastener Notice Fastener Notice. Procedure Remove the wire harness cover. Disconnect the electrical connectors from the mirror, if equipped. Adjust the mirror to the full upward position. Loosen the screw at the base in order to remove the mirror from the button. Slide the mirror in an upward motion in order to remove. Tighten: 2 N.m (18 lb in)

Callout

Component Name

Outside Rearview Mirror

NOTE: Refer to Fastener Notice Fastener Notice.

Procedure

Remove the wire harness cover.
Disconnect the electrical connectors from the mirror, if equipped.
Adjust the mirror to the full upward position.
Loosen the screw at the base in order to remove the mirror from the button.
Slide the mirror in an upward motion in order to remove.

Tighten: 2 N.m (18 lb in)