LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Impala Police >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Antilock Brake System With Traction Control System & Stability Control System) >> Repair Instructions >> Wheel Speed Sensor Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Montana SV6, 2006 Chevrolet Uplander, and 2006 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the hub and bearing assembly to the vehicle. Refer to Wheel Bearing/Hub Replacement - Front in Front Suspension.
  2. Lower the vehicle.
  3. Turn the ignition switch to the RUN position with the engine OFF.
  4. Perform diagnostic system check. Refer to Diagnostic System Check - Vehicle in Vehicle DTC Information.
scientia non olet · About LEMON Manuals