LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> HHR LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Conventional Brake Components) >> Brake Booster Pressure Monitoring System >> Brake Booster Pressure Sensor A Replacement

Brake Booster Pressure Sensor A Replacement

WARNING: This page is about a different car, the 2011 Honda Insight and 2010 Honda Insight. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cowl cover and the under-cowl panel (see COWL COVER REPLACEMENT ).
  2. Remove the nut (A) from the bracket (B).
    Fig 1: Bracket And Nut With Torque Specifications
    G06430771Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Disconnect the brake booster pressure sensor A 3P connector (C) (blue).
  4. Disconnect the vacuum hose (D), then remove brake booster pressure sensor A (E).
  5. Install the sensor in the reverse order of removal.
scientia non olet · About LEMON Manuals