LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> HHR LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Lighting Systems) >> Repair Instructions >> Brake Pedal Position Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Electrical Connector & CPA
    GM1204640Courtesy of GENERAL MOTORS CORP.
  1. Remove the instrument panel (I/P) insulator. Refer to Instrument Panel Insulator Panel Replacement .
  2. Disengage but do not remove the connector position assurance (CPA) on the connector.

    Disconnect the electrical connector (2).

    3. Fig 2: Brake Pedal Position Sensor Screw
    GM1204637Courtesy of GENERAL MOTORS CORP.
  3. Remove the screw.
  4. Remove the brake pedal position sensor.
scientia non olet · About LEMON Manuals