LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> HHR LS, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Cellular System, Entertainment System, And Navigation System) >> Repair Instructions >> Antenna Assembly Replacement - Cellular and Navigation >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the windshield upper garnish molding. Refer to Windshield Upper Garnish Molding Replacement in Interior Trim.
    2. Fig 1: View Of Antenna Assembly & Coaxial Cable
    GM1222567Courtesy of GENERAL MOTORS CORP.
  2. Disengage the retaining clips from the windshield bracket by grasping the antenna assembly at the windshield and sliding the assembly towards the passenger side of the vehicle.
  3. Lower the antenna coaxial cable from the windshield header.
  4. Disconnect the coaxial leads from the antenna base, and remove the antenna from the vehicle.
scientia non olet · About LEMON Manuals