LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> HHR LS, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Cellular System, Entertainment System, And Navigation System) >> Diagnostic Information and Procedures >> No (or Noisy) OnStar Audio >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: If the navigation mono audio signal low reference circuit is shorted to voltage the vehicle communication interface module (VCIM) has been damaged and requires replacement.
  1. Disconnect connector C2 from VCIM.
  2. Test for high resistance at the Cellular Telephone Voice signal circuit terminal 1 for an open or for a short to ground or for a short to voltage.
  3. Test for a high resistance, or for a short to voltage at the Cellular telephone voice signal low reference circuit terminal 2 for an open.
  4. If the circuits test normal, test or replace the VCIM.
scientia non olet · About LEMON Manuals