LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Equinox LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Hydraulic Brake System) >> Repair Instructions >> Master Cylinder Fluid Level Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Torrent and 2006 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Brake Fluid Level Sensor
    GM926579Courtesy of GENERAL MOTORS CORP.
  1. While noting the proper orientation, install the brake fluid level sensor to the master cylinder.
  2. Press the brake fluid level sensor firmly into the master cylinder reservoir, ensuring that the retaining tabs are fully engaged.
    3. Fig 2: Disconnecting/Connecting Brake Fluid Level Sensor Electrical Connector
    GM931316Courtesy of GENERAL MOTORS CORP.
  3. Connect the brake fluid level sensor electrical connector.
scientia non olet · About LEMON Manuals