LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Cutaway 4.8 V >> Repair and Diagnosis >> External Pages >> Different car >> Section 837 (Disc Brake System) >> Repair Instructions >> Disc Brake Splash Shield Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 GMC Savana Special, 2006 GMC Savana Camper Special, 2006 GMC Savana, 2006 Chevrolet RV Cutaway, and 2006 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Exploded View Of Disc Brake Components (15 Series)
    GM913491Courtesy of GENERAL MOTORS CORP.
  1. Install the splash shield (6), for 15 series.
    2. Fig 2: Splash Shield (25/35 Series)
    GM371077Courtesy of GENERAL MOTORS CORP.
  2. Install the splash shield, for 25/35 series.
  3. Install the hub and bearing assembly (5). Refer to Wheel Hub, Bearing, and Seal Replacement (RWD) or Wheel Hub, Bearing, and Seal Replacement (4WD) in Front Suspension.
  4. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  5. Remove the safety stands.
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals