LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Intermediate Pipe Replacement (6.0L) >> Removal Procedure

Removal Procedure

CAUTION: Refer to Exhaust Service Caution .
CAUTION: Refer to Protective Goggles and Glove Caution .
    Fig 1: View Of Exhaust Muffler Band Clamps
    GM932058Courtesy of GENERAL MOTORS CORP.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Install adjustable jack stands under the front and rear of the intermediate pipe.
  3. Loosen the exhaust muffler band clamps (2, 5).
    4. Fig 2: Left & Right Mufflers & Intermediate Pipe
    GM1461915Courtesy of GENERAL MOTORS CORP.
  4. Separate the left (1) and right (2) mufflers from the intermediate pipe (3).
    5. Fig 3: View Of Intermediate Exhaust Pipe Hanger
    GM932043Courtesy of GENERAL MOTORS CORP.
  5. Remove the exhaust pipe hanger lower bolts (3).
    6. Fig 4: View Of Intermediate Exhaust Pipe, Exhaust Manifold Nuts & Exhaust Seal
    GM932046Courtesy of GENERAL MOTORS CORP.
  6. Remove the intermediate pipe-to-catalytic converter pipe nuts (2).
  7. Remove the exhaust seal (3).
  8. Lower the jack stands.
  9. Remove the intermediate pipe from the jack stands.
scientia non olet · About LEMON Manuals