Installation Procedure

Fig 1: View Of Generator Bracket & Bolts (4.3L)

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the generator bracket.
Install the generator bracket bolts and nut.
Tighten: Tighten the bolts/nut to 41 N.m (30 lb ft).
Install the drive belt tensioner. Refer to Drive Belt Tensioner Replacement .
Install the generator. Refer to Generator Replacement (4.3L) or Generator Replacement (4.8L, 5.3L, and 6.0L) or Generator Replacement (6.6L) .

Fig 2: View Of Heater Hose Bracket Bolt (4.3L Engine)

Courtesy of GENERAL MOTORS CORP.

Install the heater hose bracket bolt.
Tighten: Tighten the bolt to 25 N.m (18 lb ft).

Fig 3: View Of Wiring Harness Bracket Bolt (4.3L Engine)

Courtesy of GENERAL MOTORS CORP.

Install the wiring harness bracket bolt.
Tighten: Tighten the bolt to 25 N.m (18 lb ft).
Install the cooling fan. Refer to Fan Replacement .
Install the drive belt. Refer to Drive Belt Replacement .

Fig 4: View Of Air Cleaner Outlet Duct

Courtesy of GENERAL MOTORS CORP.

Align the hinge clip with the lip on the throttle body.
In order to install the air cleaner outlet duct, pivot the air cleaner outlet duct downward until the mounting stud is through the hole.

Fig 5: View Of Air Cleaner Adapter Nut

Courtesy of GENERAL MOTORS CORP.

Fig 6: PCV Hose

Courtesy of GENERAL MOTORS CORP.

Fig 7: View Of Air Cleaner Outlet Duct Clamp

Courtesy of GENERAL MOTORS CORP.

Tighten the air cleaner outlet duct clamp at the MAF/IAT sensor.
Tighten: Tighten the clamps to 4 N.m (35 lb in).