LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Chevy Express G3500, Van Cargo Extended, 6.6 2 >> Repair and Diagnosis >> Steering >> Steering Wheel & Steering Column >> Repair Instructions >> Turn Signal Multifunction Switch Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Steering Column Wire Harness Assembly & Wire Harness Strap
    GM415293Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to SIR Caution .
  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the steering wheel. Refer to Steering Wheel Replacement .
  3. Remove the upper and lower trim covers. Refer to Steering Column Trim Covers Replacement .
  4. Disconnect the turn signal and multifunction switch assembly connector.
    Fig 2: Turn Signal & Multifunction Switch Assembly Connectors
    GM306234Courtesy of GENERAL MOTORS CORP.
  5. Remove the 2 screws (1) from the turn signal and multifunction switch assembly (2).
    Fig 3: View Of Turn Signal & Multifunction Switch Assembly
    GM664256Courtesy of GENERAL MOTORS CORP.
  6. Remove the turn signal and multifunction switch assembly from the steering column tilt head assembly.
scientia non olet · About LEMON Manuals