LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Stabilizer Shaft Insulator Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Move/turn the tires in order to access the stabilizer shaft insulator brackets.
    3. Fig 1: View Of Insulator Brackets
    GM357447Courtesy of GENERAL MOTORS CORP.
  3. Remove the left and right side stabilizer shaft insulator bracket bolts.
  4. Remove the left and right side stabilizer shaft insulator brackets.
    5. Fig 2: Stabilizer Shaft Insulators
    GM174594Courtesy of GENERAL MOTORS CORP.
  5. Remove the left and right side stabilizer shaft insulators (1) from the stabilizer shaft (2).
scientia non olet · About LEMON Manuals