LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heating, Ventilation And Air Conditioning >> Repair Instructions >> Compressor Relay Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Compressor Relay
    GM1547624Courtesy of GENERAL MOTORS CORP.
  1. Remove the underhood electrical center cover.
  2. Locate the compressor relay. Refer to Electrical Center Identification Views to locate the A/C compressor relay.
    3. IMPORTANT:
    • Always note the orientation of the relay.
    • Ensure that the electrical center is secure, as not to put added stress on the wires or terminals.
  3. Using the J 43244  position the tool on opposing corners of the compressor relay.
  4. Remove the relay from the electrical center.
scientia non olet · About LEMON Manuals