LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls - 3.9L - Introduction (2 Of 2)) >> Repair Instructions >> Fuel Tank Replacement (Short Wheel Base) >> Disassembly Procedure

Disassembly Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove EVAP canister. Refer to Evaporative Emission Canister Replacement (Short Wheel Base) .
  2. Disconnect the fuel feed pipe quick-connect fitting . Refer to Plastic Collar Quick Connect Fitting Service .
    3. Fig 1: Identifying Fuel Tank And Related Components
    GM1544794Courtesy of GENERAL MOTORS CORP.
  3. Remove the fuel tank module (4). Refer to Fuel Tank Module Replacement (Short Wheel Base) .
  4. Remove the EVAP canister vent solenoid (2).
  5. Remove the EVAP pipe assembly.
  6. Remove fuel tank module (3). Refer to Fuel Tank Module Replacement (Short Wheel Base) .
scientia non olet · About LEMON Manuals