LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Entertainment Systems) >> Repair Instructions >> Radio Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Radio
    GM1282670Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Perform the radio set up procedure for new radios. Refer to Radio Setup .
  1. Remove the HVAC control assembly. Refer to HVAC Control Assembly Replacement in HVAC Systems - Manual.
  2. Remove the drivers information center switch bank. Refer to Driver Information Center Switch Replacement in Instrument Panel, Gages and Console.
  3. Remove the radio screws.
  4. Pull the radio toward you.
    5. Fig 2: View Of Instrument Panel Wiring Harness Connectors
    GM929292Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the instrument panel (I/P) wiring harness connectors and the antenna cable connector from the radio.
  6. Remove the radio.
scientia non olet · About LEMON Manuals