LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick LaCrosse and 2005 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition OFF.
  2. Remove the generator. Refer to Generator Replacement (L26)  or Generator Replacement (LY7) .
  3. Remove the coolant inlet pipe lower bolt from the generator bracket.
  4. Remove the belt tensioner. Refer to Drive Belt Tensioner Replacement .
    5. Fig 1: View Of Generator Bracket Bolts - LY7
    GM887707Courtesy of GENERAL MOTORS CORP.
  5. Remove the generator bracket bolts.
  6. Remove the generator bracket.
scientia non olet · About LEMON Manuals