LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 292 (Sunroof System) >> Repair Instructions >> Sunroof Window Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the sunroof window panel to the sunroof module.

    Ensure that the information logo stencil is towards the rear of the sunroof opening.

    Fig 1: View Of Sunroof Window Panel Screws
    GM294278Courtesy of GENERAL MOTORS CORP.
  2. Install the sunroof window panel screws to the sunroof window panel.

    Tighten:  Tighten the sunroof window panel screws to 4 N.m (35 lb in).

    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Adjust the sunroof window panel as necessary. Refer to Sunroof Window Height and Opening Fit Adjustment .
  4. Inspect the sunroof window panel for proper operation.