Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Position the center bottom of the mirror mount against the windshield at the top of the support button.

Fig 1: View Of Rearview Mirror
Courtesy of GENERAL MOTORS CORP.
Slide the base of the mirror onto the button.
Make sure the mirror is firmly seated on the windshield button by pushing down on the base of the mirror.
Tighten: Tighten the screw (3) to 1.8 N.m (16 lb in) in order to secure the mirror base to the button.

NOTE: Refer to Fastener Notice .
Connect the electrical connector (3) to the back of the mirror.

Fig 2: Exploded View Of Rearview Mirror Electrical Connector Components
Courtesy of GENERAL MOTORS CORP.
Install the wire harness cover.
Reposition the mirror.