Rear Toe Adjustment

WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Loosen the jam nuts at the rear wheel spindle rod - rear.

Fig 1: View Of Jam Nut At Rear Wheel Spindle Rod
Courtesy of GENERAL MOTORS CORP.
Turn the adjusting nut to change the toe angle.

Fig 2: View Of Rear Toe Adjustment
Courtesy of GENERAL MOTORS CORP.
Adjust the toe to the proper setting. Refer to Wheel Alignment Specifications .
Tighten the jam nuts on the rear wheel spindle rod - rear.
Tighten: Tighten the rear wheel spindle rod end jam nuts to 70 N.m (52 lb ft).

Fig 3: View Of Jam Nut At Rear Wheel Spindle Rod
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .