LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 265 (Engine Cooling System) >> Repair Instructions >> Engine Oil Cooler Hose/Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right engine splash shield. Refer to Splash Shield Replacement - Engine (Right) or Splash Shield Replacement - Engine (Left) .
  2. Remove the lower air baffle. Refer to Radiator Air Lower Baffle and Deflector Replacement .
  3. Remove the support clip from the engine oil cooler lines.
  4. Remove the engine oil cooler lines from the engine oil cooler. Refer to Engine Oil Cooler Pipe/Hose Quick Connect Fitting .
    Fig 1: View Of Engine Oil Cooler Lines
    GM1335222Courtesy of GENERAL MOTORS CORP.
  5. Remove the engine oil cooler lines from the engine oil filter adapter. Refer to Engine Oil Cooler Pipe/Hose Quick Connect Fitting .
  6. Remove the engine oil cooler lines from the vehicle.
scientia non olet · About LEMON Manuals