LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 205 (Front Suspension System) >> Repair Instructions >> Stabilizer Shaft Insulator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Stabilizer Shaft Insulators
    GM174594Courtesy of GENERAL MOTORS CORP.
  1. Install the left and right side stabilizer shaft insulators (1) to the stabilizer shaft (2).
    2. Fig 2: View Of Insulator Brackets
    GM357447Courtesy of GENERAL MOTORS CORP.
  2. Install the left and right side stabilizer shaft insulator brackets.
    NOTE: Refer to Fastener Notice .
  3. Install the left and right side stabilizer shaft insulator bracket bolts.

    Tighten:  Tighten the stabilizer shaft insulator bracket bolts to 42 N.m (31 lb ft).

  4. Lower the vehicle.
scientia non olet · About LEMON Manuals