LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (Engine Control System - 5.3L - Introduction (2 Of 2)) >> Repair Instructions >> Fuel Injector Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing The Fuel Injector Retaining Clip
    GM1411907Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel rail. Refer to Fuel Rail Assembly Replacement .
  2. Remove the fuel injector retaining clip (521), as required.
  3. Remove the fuel injector (533), as required
  4. Remove and discard the fuel injector O-ring seals (532, 534), as required.
scientia non olet · About LEMON Manuals