LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 181 (Engine Control System - 5.3L - Introduction (2 Of 2)) >> Repair Instructions >> Brake Booster Vacuum Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing The Brake Booster Vacuum Sensor
    GM1488348Courtesy of GENERAL MOTORS CORP.
  1. Install the brake booster vacuum sensor grommet (2) to the booster.
  2. Install the brake booster vacuum sensor (1) to the booster.
    3. Fig 2: Connecting The Brake Booster Vacuum Sensor Electrical Connector
    GM1618878Courtesy of GENERAL MOTORS CORP.
  3. Connect the brake booster vacuum sensor electrical connector.
scientia non olet · About LEMON Manuals