LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Power Roof System) >> Repair Instructions >> Sunroof Window Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Sunroof Window Panel Screws
    GM294278Courtesy of GENERAL MOTORS CORP.
  1. Position the sunroof window panel to the sunroof module.

    Ensure that the information logo stencil is towards the rear of the sunroof opening.

    2. NOTE: Refer to FASTENER NOTICE in General Information.
  2. Install the sunroof window panel screws to the sunroof window panel.

    Tighten:  Tighten the sunroof window panel screws to 4 N.m (35 lb in).

  3. Adjust the sunroof window panel as necessary. Refer to Sunroof Window Height and Opening Fit Adjustment .
  4. Inspect the sunroof window panel for proper operation.
scientia non olet · About LEMON Manuals