LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.5L - Introduction (2 Of 2) >> Repair Instructions >> Mass Air Flow (MAF) Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Turn OFF the ignition.
    2. Fig 1: Identifying Mass Air Flow (MAF) Sensor
    GM1544729Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the mass air flow (MAF) sensor electrical connector (1).
  3. Remove the air inlet duct. Refer to Air Cleaner Intake Duct Replacement .
  4. Remove the MAF sensor (2) from the air filter housing.
scientia non olet · About LEMON Manuals