LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Remote Control Replacement - Sit-N-Lift >> Removal Procedure

Removal Procedure

    Fig 1: View Of Right Side Upper Trim Panel
    GM1368170Courtesy of GENERAL MOTORS CORP.
  1. Remove the right side upper trim panel from the seat base.
  2. Remove the rear trim panel from the seat base.
    3. Fig 2: Locating Electrical Connector
    GM1368543Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector from the seat base.
    4. Fig 3: View Of Remote Control
    GM1368565Courtesy of GENERAL MOTORS CORP.
  4. Remove the remote control and the chord from the vehicle.
scientia non olet · About LEMON Manuals