LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Remote Control Replacement - Sit-N-Lift >> Installation Procedure

Installation Procedure

    Fig 1: View Of Remote Control
    GM1368565Courtesy of GENERAL MOTORS CORP.
  1. Install the remote control and the chord to the seat base.
  2. Fig 2: Locating Electrical Connector
    GM1368543Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector to the seat base.
  4. Fig 3: View Of Right Side Upper Trim Panel
    GM1368170Courtesy of GENERAL MOTORS CORP.
  5. Install the rear trim panel to the seat base.
  6. Install the right side upper trim panel to the seat base.
  7. Test the seat for proper operation.