LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Mobility Seat Control Module Replacement - Sit-N-Lift >> Removal Procedure

Removal Procedure

  1. Remove the upper seat trim. Refer to Trim Replacement - Sit-N-Lift Upper .
    2. Fig 1: Removing & Installing Fasteners For Module Bracket
    GM1368553Courtesy of GENERAL MOTORS CORP.
  2. Remove the fasteners from the module bracket.
    3. Fig 2: Locating Electrical Connectors
    GM1368564Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connectors from the module.
    4. Fig 3: View Of Mobility Seat Control Module
    GM1368566Courtesy of GENERAL MOTORS CORP.
  4. Remove the module from the seat base.
scientia non olet · About LEMON Manuals