LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Repair Instructions >> Wiper Motor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Removing/Installing Wiper Motor Module
    GM1480117Courtesy of GENERAL MOTORS CORP.
  1. Remove the wiper motor module (5). Refer to Wiper Motor Module Replacement .
    2. Fig 2: Removing/Installing Wiper Motor Crank Arm
    GM1527648Courtesy of GENERAL MOTORS CORP.
  2. Using the J 39232  , disconnect the transmission linkage (1) from the wiper motor crank arm (5). See Special Tools .
  3. Remove the wiper motor crank arm nut (4) and crank arm (5).
  4. Remove the wiper motor screws (3).
  5. Remove the wiper motor from the module assembly.
scientia non olet · About LEMON Manuals