LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Repair Instructions >> Wiper Arm Blade Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Removing & Installing Wiper Blade At Wiper Arm Hook
    GM497492Courtesy of GENERAL MOTORS CORP.
  1. Insert the hook of the wiper arm through the opening in the wiper blade.
    2. Fig 2: View Of Wiper Blade Clip
    GM497481Courtesy of GENERAL MOTORS CORP.
  2. Position the wiper blade pivot in the inside radius of the wiper arm hook.
  3. Pull the wiper blade pivot into the wiper arm hook until the pivot locks into the hook.
  4. Lower both wiper arms back onto the windshield.
  5. Close the hood.
  6. Inspect the wipers for proper operation.
scientia non olet · About LEMON Manuals