LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> Uplander Base >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System >> Repair Instructions >> Information Center Telltale Assembly Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Information Center Telltale Assembly
    GM491157Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the information center telltale assembly.
  2. Position the information center telltale assembly into the headliner until locking tab locks into position. It may be necessary to rock the display into position.
  3. Install bezel by pressing into place until the locking tabs are fully seated.
scientia non olet · About LEMON Manuals