LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> TrailBlazer 5.3 M, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 192 (Programming And Setup - All Systems) >> Repair Instructions >> Passenger Presence System Programming and Setup >> Introduction

Passenger Presence System Programming and Setup: Introduction

WARNING: This page is about a different car, the 2007 Isuzu Ascender, 2007 GMC Envoy, 2007 Chevrolet TrailBlazer, and 2007 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.

The passenger presence system (PPS) is a calibrated system that requires rezeroing when the system has been serviced or replaced. The procedures below are designed to assist in the rezeroing of the PPS. Before you start, read these procedures carefully and completely. For further information regarding the PPS, refer to SIR System Description and Operation .

IMPORTANT: The following procedures must be followed:
  1. Read this procedure carefully and completely.
  2. The PPS will not function properly if the PPS rezeroing procedure is not performed.
  3. Perform the Diagnostic System Check - Vehicle , after successfully completing the rezeroing procedure to ensure the system is functioning properly.
scientia non olet · About LEMON Manuals