Installation Procedure
WARNING: This page is about a different car, the 2007 Isuzu Ascender, 2007 GMC Envoy, 2007 Chevrolet TrailBlazer, and 2007 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the module to the liftgate.
- Install the bolts that retain the module to the liftgate.
Tighten: Tighten the bolts to 10 N.m (89 lb in).
- Connect the electrical connectors (3) as necessary.
- Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
- Program the liftgate control module. Refer to Control Module References .
NOTE:
Refer to Fastener Notice
.