Front Toe Adjustment
WARNING: This page is about a different car, the 2007 Isuzu Ascender, 2007 GMC Envoy, 2007 Chevrolet TrailBlazer, and 2007 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the jam nut on the outer tie rod (2).
- Rotate the inner tie rod (1) to the required toe specification setting. Refer to Wheel Alignment Specifications .
- Tighten the jam nut on the outer tie rod.
Tighten: Tighten the outer tie rod jam nut to 75 N.m (55 lb ft).
- Check the toe setting after tightening.
- Re-adjust the toe setting if necessary.
NOTE:
Care must be taken that the boots are not twisted when rotating the inner tie rods or damage to the boots may result.
NOTE:
Refer to FASTENER NOTICE
.