LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> TrailBlazer 5.3 M, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 201 (Antilock Brake System, Traction Control System & Stability Control System) >> Repair Instructions >> Wheel Speed Sensor Ring Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Isuzu Ascender, 2007 GMC Envoy, 2007 Chevrolet TrailBlazer, and 2007 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of J 45860 & J 8092 Wheel Speed Sensor Ring Installation Tools
    GM885621Courtesy of GENERAL MOTORS CORP.
  1. Install the wheel speed sensor ring using the J 45860  (1) and the J 8092  (2).
  2. Drive the wheel speed sensor ring into the axle housing until the tool bottoms against the tube.
  3. Fig 2: View Of Axle Shaft Bearing & Installation Tools J 23690 Or J 29709 & J 8092
    GM695758Courtesy of GENERAL MOTORS CORP.
  4. Install the axle shaft bearing using the J 23690  (1) and the J 8092  (2).
  5. Drive the axle shaft bearing into the axle housing until the tool bottoms against the tube.
  6. Fig 3: View Of Axle Shaft Seal & J 21128
    GM885624Courtesy of GENERAL MOTORS CORP.
  7. Install the axle shaft seal using the J 21128  .
  8. Drive the tool into the bore until the axle shaft seal bottoms flush with the tube.
  9. Install the axle shaft. Refer to Rear Axle Shaft Replacement .
  10. Install the rear axle housing cover. Refer to Rear Axle Housing Cover and Gasket Replacement (8.0/8.6 Inch Axle) or Rear Axle Housing Cover and Gasket Replacement (9.5 Inch Axle) .
  11. Install the rear wheel speed sensor. Refer to Rear Wheel Speed Sensor Replacement .
  12. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  13. Fill the rear axle. Refer to Lubricant Replacement - Rear Drive Axle (9.5 LD Inch Axle) .
  14. Lower the vehicle.