Installation Procedure
WARNING: This page is about a different car, the 2007 Isuzu Ascender, 2007 GMC Envoy, 2007 Chevrolet TrailBlazer, and 2007 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
- Install the ORVM assembly to the door. Ensure that the retaining clip is fully seated.
- Install the 3 ORVM retaining bolts.
Tighten: Tighten the bolts to 10 N.m (88 lb in).
- Install the side door insulator.
- Install the ORVM harness to the door.
- Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .
NOTE:
Refer to Fastener Notice
.