LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> TrailBlazer 5.3 M, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 167 (Lighting Systems) >> Repair Instructions >> Stop Lamp Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Isuzu Ascender, 2007 GMC Envoy, 2007 Chevrolet TrailBlazer, and 2007 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Removing/Installing Brake Light Switch
    GM748017Courtesy of GENERAL MOTORS CORP.
  1. Install the electrical connector to the stop lamp switch (1).
  2. Position the stop lamp switch (1) on the pushrod (2) and install the assembly on the brake pedal pin.
  3. Install the pushrod retainer (3) to the brake pedal pin (4). The retainer will snap into place.
  4. Install the left sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
scientia non olet · About LEMON Manuals