Installation Procedure

WARNING: This page is about a different car, the 2007 Isuzu Ascender, 2007 GMC Envoy, 2007 Chevrolet TrailBlazer, and 2007 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Speaker & Retaining Screws To Instrument Panel (IP) Substrate

Courtesy of GENERAL MOTORS CORP.

Install the speaker to the I/P.
Connect the speaker electrical connector.

NOTE: Refer to FASTENER NOTICE .

Install the 3 speaker retaining screws.
Tighten: Tighten the screws to 2 N.m (18 lb in).

Fig 2: View Of Instrument Panel (I/P) Upper Trim Pad

Courtesy of GENERAL MOTORS CORP.

Install the trim pad. Refer to Instrument Panel Upper Trim Pad Replacement .