LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> SSR Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Systems - Manual >> Repair Instructions >> Recirculation Actuator Replacement >> Installation Procedure

Installation Procedure

  1. Connect the electrical connector (3) to the recirculation actuator (2).
    2. Fig 1: View Of Recirculation Actuator
    GM888409Courtesy of GENERAL MOTORS CORP.
  2. Install the recirculation actuator (2).
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the 3 screws (1) to the recirculation actuator (2).

    Tighten:  Tighten the screws to 1.9 N.m (17 lb in).

  4. Install the HVAC module assembly. Refer to HVAC Module Assembly Replacement .
scientia non olet · About LEMON Manuals