LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2006 >> SSR Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Battery, Charging System And Starting System) >> Diagnostic Information and Procedures >> Scan Tool Data List

Scan Tool Data List

WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Body Control Module (BCM)

Scan Tool Parameter Data List Units Displayed Typical Data Value
Ignition ON/Engine Running
Battery Voltage Signal Data Volts 13.9 Volts
Ignition Mode Switch Data IDLE / ACC / OFF / CRANK IDLE
Engine Control Module (ECM)

Scan Tool Parameter Data List Units Displayed Typical Data Value
Ignition ON/Engine OFF
Crank Request Signal Engine Electrical Yes/No No
GEN F-Terminal Signal Engine Electrical % 0%
GEN L-Terminal Signal Command Engine Electrical % 0%
GEN L-Terminal Circuit Status Engine Electrical Incomplete / Short Gnd / Open / Short to B+ / OK OK
Ignition 1 Signal Engine Electrical Volts Varies
PNP Switch Engine Electrical Park / Neutral / In Gear Park
Starter Relay Command Engine Electrical On/Off Off
Starter Relay Circuit Status Engine Electrical Incomplete / Short Gnd / Open / Short to B+ / OK OK
Sensing Diagnostic Module(SDM)

Scan Tool Parameter Data List Units Displayed Typical Data Value
Ignition ON/Engine Running
Battery Voltage Signal Data Volts 13.9 Volts
Transmission Control Module (TCM)

Scan Tool Parameter Data List Units Displayed Typical Data Value
Ignition ON/Transmission in Park
IMS Data Park, Park/Reverse, Reverse, Reverse/Neutral, Neutral, Neutral/Drive 4, Drive 4, Drive 4/Drive 3, Drive 3, Drive 3/Drive 2, Drive 2, Drive 2/Drive 1, Drive 1, INVALID, OPEN Park