Calibration Procedure
WARNING: This page is about a different car, the 2006 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Apply the parking brake.
- Place the transmission is in the PARK position.
- Install a scan tool.
- Clear all BCM DTCs before proceeding.
- Turn ON the ignition, with the engine OFF.
- Navigate to the Vehicle Control Systems menu.
- Select Computer/Integrating Systems menu item.
- Select Module Setup menu item.
- Select BCM menu item.
- Select the BPPS calibration procedure and follow the directions displayed on the screen.