Installation Procedure
WARNING: This page is about a different car, the 2006 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Make sure the reference marks on the hoses and the radiator are lined up. A twist on the hose would place strain on the radiator fitting which could cause the fitting to crack or break.
IMPORTANT:
Lubricate the inside diameters of the hose with clean coolant prior to installation.
- Install the radiator outlet hose.
- Connect the radiator outlet hose to the engine.
- Engage tension on the radiator outlet hose clamp at the engine.
- Raise the vehicle.
- Connect the radiator outlet hose to the radiator.
- Engage tension on the radiator outlet hose clamp at the radiator.
- Lower the vehicle.
- Fill the cooling system. Refer to Draining and Filling Cooling System (Static Fill) or Draining and Filling Cooling System (GE 47716) .