Scan Tool Output Controls

WARNING: This page is about a different car, the 2006 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

Scan Tool Output Control	Additional Menu Selection	Description
Column Lock Relay	Body Control Module	Commands the column lock relay on or off.
Default Position	DPM	Commands the steering column to telescope to the default position.
Exit 1	DPM	Commands the steering column to telescope to the Exit 1 position.
Exit 2	DPM	Commands the steering column to telescope to the Exit 2 position.
Memory 1	DPM	Commands the steering column to telescope to the Memory 1 position.
Memory 2	DPM	Commands the steering column to telescope to the Memory 2 position.
Telescope Motor	DPM	Commands the steering column to telescope in or out.