Fastener Tightening Specifications
WARNING: This page is about a different car, the 2007 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Lower Control Arm Ball Joint Stud Nut | ||
|
30 N.m | 22 lb ft |
|
180 degrees | |
| Lower Control Arm Cam Bolt Nut - Front | 145 N.m | 107 lb ft |
| Lower Control Arm Cam Bolt Nut - Rear | 95 N.m | 70 lb ft |
| Outer Tie Rod End Stud Nut | ||
|
20 N.m | 15 lb ft |
|
160 degrees | |
|
60 N.m | 45 lb ft |
| Rear Crossmember Mounting Nuts | 110 N.m | 81 lb ft |
| Rear Suspension Adjustment Link to Crossmember Nut | 60 N.m | 44 lb ft |
| Shock Absorber Lower Mounting Nut | 145 N.m | 107 lb ft |
| Shock Absorber Upper Mounting Bolts | 30 N.m | 22 lb ft |
| Stabilizer Shaft Insulator Clamp Bolt | 65 N.m | 49 lb ft |
| Stabilizer Shaft Insulator Clamp Nut | 95 N.m | 70 lb ft |
| Stabilizer Shaft Link Nuts | 72 N.m | 53 lb ft |
| Transverse Spring Mounting Bracket Bolts | 62 N.m | 46 lb ft |
| Upper Control Arm Ball Joint Stud Nut | ||
|
20 N.m | 15 lb ft |
|
195 degrees | |
| Upper Control Arm Mounting Bolt | 110 N.m | 81 lb ft |
| Upper Control Arm Mounting Bolts with RPO FE4 (ZO6) | 65 N.m | 48 lb ft |
| Wheel Hub Mounting Bolts | 130 N.m | 96 lb ft |